CHJ輪機員安全報警系統-杭州華雁

　　功能描述：
　　輪機員安全報警器面板設有6路報警啟動指示燈，可分別指示各路輸入的啟動狀態，對應的指示燈下方為對應的報警啟動按鈕，輕觸即可啟動該路進入報警啟動狀態，對應鍵的狀態燈亮指示已進入報警啟動狀態，系統進入到計時（默認2分鐘）。
　　面板設有一個消音鍵，按消音鍵，撤銷所有報警啟動，進入待機狀態。
　　主機有6路檢測回路，一付輸出有源觸電DC24V/1A和一付無源（常開/常閉）觸電。
　　報警顯示板可顯示系統啟動和報警狀態，系統報警時發出聲光報警型號。
　　Functional Description
　　Six alarm indicator light be set on dead Man Alarm main unit front panel,It display working state,There is a start pushbutton under eacho of alarm indicator light,Press these button take the system in alarm monitoring state,System in time count down(monitoring time be set in two minutes normally)
　　One “Mute”key be set on dead Man Alarm main unit front panel,cancel all alarm state when press “Mute”key,and the system in standby state.
　　Sytem has six monitoring loop,one voltage (DC24V/1A)contactor,one vol-free(normal opend/closed)contactor.
　　Alarm display panek display system start and alarm state,It send out sond and light signal when system in alarm state
　　采用標準：
　　符合《鋼質海船入級規范》（2012）第4篇，第2章，第8節，第2.8.4款
　　IMO A.1021(26)決議《（2009）警報器和指示器規則》
　　Adopt standard
　　Item 2.8.4Section 8,Chapter 2,Part 4 of CCS Rules for the Classification of Sea-going Steel Ships(2012)
　　IMO RESOLUTION A.1021(26) CODE ON ALARMS AND INDICATIONS,2009